Whether it’s a construction site or a warehouse, a tip-over case with forklift equipment is an inevitable case. This is usually a disastrous situation, and surely a terrible one. It could lead to severe injuries, and worse case, death. Research clearly shows that over a hundred workers die from forklift tip-overs. This leads to as much as 20,000 injuries as well. Based on statistical results, it simply means that just one out of every ten operators or warehouse is bound to encounter such an accident every year.

When you invest in used forklift trucks for sale, you must ensure that your operators get a clear understanding of the possible causes that tag along with operating the forklift. The good news is that there are possible ways to ignore or avoid such problems as well. With proper care and knowledge, operators and owners can reduce the risks of accidents.

According to studies conducted by OSHA, about 25% of forklift-related accidents often occur because of a lack of proper training on how to operate the equipment. However, coming back to the main point, here are the common causes of tip-overs in forklifts, and how to reduce the risks of encountering them.

Turning with a Raised Load

When it comes to forklift accidents, some elevated loads are the leading causes of deaths and accidents of forklifts across the United States. In most cases, loads are the most common contributors to tip-overs with forklifts. This occurs with sudden turning of the loads, where it involves constant raising and lowering of the loads. This often causes the trucks to have more force on the side of the truck, compared to the other. Eventually, this has an immediate effect on stability. In addition, laden trucks are also prone to have less stability as the load raises higher. Operators at such times have to maneuver the truck with more force at this point. Most operators look at elevated loads as cost reduction strategies, and time savers, but the consequences of the tip-over are higher than any chances of gains.

Tips to Avoid the Risk

When lifting a heavy load, operators should ensure they proceed with this with one load at a time. Upon picking the load, move the forklift slowly, and move it slowly as well. When offloading it, lower the forks safely. When tackling the loads, avoid speeding and making sudden turns. It is best to inform operators about the best strategies that will increase the chances or risks of any accidents. In addition, you can consult experts, such as those at Truck Forklifts, who should have the best quality trucks.

Moving of Suspended or Lifted Loads

When it comes to handling live loads, or those above the forks, this contributes to the forklift tipping over. This usually occurs from the lifting of bulk bags or loads that hang from the attachments, rather than setting the pallets. With forklift tip-over cases, accidents often occur because of heavy loads. Unlike pallet load, which is stationary, a suspended one is likely to rotate or move. Slight changes in the movement will also affect the center of the load, causing a tip over.

Preventing this Risk

Usually, the best advice here is to drive the equipment slowly with such a load. It is best to drive in reverse mode, which should maintain a slow speed. This minimizes the momentum and the view of the operator would be clear as well. It is best to place load on the pallet, which is a safer option. If the load topples over, it is best to not suspend it with the center sling. Place it lower on the bearers to prevent the movement on both sides. It is also best to reduce transportation to further distances with such loads. The longer the load suspension, the higher the chances of forklift accidents.

Lifting a Heavy Load on a Slope

When it comes to moving the load, avoid moving on slopes. If the load is much, the forklift will then tip over. When driving on uneven ground as well, this can eventually lead to such accidents. The best way to move is up a slope and backward, in two directions. Avoid moving the equipment in a diagonal way or across. In case you try this, it will only have an effect on the truck’s stability and the weight will have an impact on the balance of the truck. Just make sure the weight distribution has a balance as well on the forks.

Preventing this Risk

Just make sure you move the truck in a forward and backward manner on slopes or rough roads. Inspect the area properly and watch out for potholes, debris, and curbs. Ensure the route you are planning to take is clear to move the load.

Regardless of whether you choose a Moffett or any used forklift trucks for sale, check the load capacity. Also make sure to load just the right amount the equipment can carry.

Leave a Reply

Your email address will not be published. Required fields are marked *