When you want to keep your property safe, you can’t go wrong with the Arlo security camera system. Arlo is a smart home and home security camera brand that makes easy-to-use cameras that you can control from anywhere in the world.
The Arlo system comes with a base station, which connects to your Wi-Fi network, and one or more wireless cameras. The base station has a built-in siren that goes off if the system detects any security threats, and it’s expandable so you can add more cameras as your needs change. You can view what’s going on at your home 24/7 through the free Arlo app on your smartphone, tablet, or computer.
Here are the steps to complete the Setup Arlo Camera process:
1. First, you have to download the Arlo App on your iOS or Android device.
2. On your Smartphone, open the Arlo App and click the New System Setup option.
3. Click Add Device tab and then follow the on-screen instructions to complete the process of Arlo setup successfully.
4. After that, you have to create an account using a valid email address followed by a strong password so that no one can access your account without permission.
5. Now, you will get a confirmation email on your registered email address so check it properly for verification purposes.
6. Once the process of verification is completed, you can log in.
Common Errors During Arlo Setup Process:
Most of the time, the Setup Arlo Camera process occurs without any issues. When this is not the case, however, you will see errors or problems while setting up your device. Here are a few common errors that can arise during Arlo Setup:
Unable to connect to your router:
This error message happens when your Internet router is too far away from the Arlo camera base station. It means that the cameras cannot connect to the base station because of insufficient signal strength. To fix this issue, move your base station closer to your router.
Unable to connect to the Internet:
This error message means that you are using a guest account on your mobile device. Arlo requires a full user account in order to access your cameras through an app. If you are using a guest account, log into a full user account on your phone or tablet and try again.
Can’t establish a connection between base station and camera:
This error message appears if no light is coming from the LEDs on your Arlo camera power adapter or if you do not hear any chirps when connecting the power adapter to an outlet. If this happens, unplug the camera power adapter from an outlet and plug it back in.
Read Also: Arlo Camera Offline
Troubleshooting Steps to solve these issues:
Connect your camera with your base station using the USB cable.
Power on both devices.
Press and release the Sync button on your base station. The Internet LED will turn green.
Press and hold the Sync button on your camera until you hear a beep sound from it.
Remove the USB cable from your camera.
The LED on your camera will flash amber for two minutes, after which it will turn solid green if syncing was successful.
Ensure that your Arlo base station is connected to the router.
Update your mobile application.
Try a different location and power source
To narrow down your Arlo Setup problem, try setting up at a different location with a different power source. If you have more than one Arlo camera, set up one camera in a different location. If you are using batteries, use fresh batteries for each camera. For example:
If you tried to set up your Arlo camera indoors, try setting it up outdoors.
If you tried to set up your Arlo camera outdoors, try setting it up indoors.
If you tried to set up your Arlo camera on battery power, plug the base station into an outlet.
If you tried to set up your Arlo camera while connected to the base station’s Ethernet port, use Wi-Fi instead. If you are Arlo Login Issue then visit https://setuparlocamera.com/arlo-login-issue/
Conclusion
Hopefully, this article will be beneficial to you. Thank you for giving us your precious time.
Now, you can easily and freely take full access to the full HD captures of Arlo. Your success is our success.
Stay tuned with us…