The plumbing system is one of the most important facilities in every home. Aside from the main water supply, it also includes the waste water disposal in every home. Most likely, you’ll never think about the plumbing system of your home unless a problem arises such as a leak or clog.
While some of these problems can be fixed with DIY skills, there are other problems that need the hands of a professional plumber. Although plumbing problems could occur anytime, you could actually lower the chances or prevent it from occurring. Here are some of the most common plumbing problems and how to avoid them.
Leaking Faucets and Pipes
Leaking faucets and pipes aren’t that much of an emergency especially if it’s just a small leak. However, it could lead to so much water wasted which adds up to your water bill. Leaks are caused by a variety of reasons – damaged seals, worn out valve seat, pipe deterioration, and even high-water pressure damage.
Although regular wear and tear on pipes can’t be avoided, you can slow the wear by being careful in turning the faucet on and off. Also, check the water pressure if it’s too high since it could also add up to the wear of your pipes and faucets.
Toilet and Drain Clogs
You’ll know there is a clog when the drain or toilet is backing up when you’re using it. Drain clogs are commonly caused by non-dissolvable items such as hair, accumulated soap, grease, and many more. Toilet clogs, on the other hand, are caused by non-flushable items thrown into the toilet bowl. All these items slow or block the natural flow of wastewater through the pipes, causing a clog.
You could lessen this problem from occurring by having a trash bin inside the toilet. All those non-flushable and non-dissolvable items should be thrown into the bin and not into the drain or bowl. Although some clogs are easy to remove, there are more stubborn ones that are hard to clear up. Save yourself the hassle and call a plumber to do the job. For best plumber South Yarra is a good place to look into.
Running Toilet
A running toilet is a big plumbing problem that should be fixed immediately since it wastes a lot of water and increases your water bill significantly if left unfixed. In this case, the toilet is totally fine. However, the water constantly runs down even after flushing.
Most likely, a faulty flapper valve is the main reason for running toilets. However, it could also be caused by other things such as a leaking or loose fill tube or an imbalanced float. Replacing the faulty toilet components typically fixes this issue. However, if you’re not sure what to do, you could always call a plumber to fix the problem.
If you have plumbing issues yet not sure what to do, it is always best to hire a plumber rather than trying to fix it by yourself.
