The installation of an air conditioning system is a serious task that needs to be taken into consideration not only for your comfort but for the value of your property. Taking into account that Brisbane’s weather conditions can be quite hot and humid, the selection and the quality of the installation have much to do with the efficiency of your system.
Before deciding upon installing an air conditioner, homeowners have to know everything about professional air conditioning installation in Brisbane in order to avoid potential inconveniences caused by their mistake.
Choosing the Right Air Conditioning System
Split System or Ducted
If you are going to install an air conditioning system for one room or just for a small house, split systems will work best for you. Ducted systems are more suitable for bigger houses because they can cool the whole house.
Size Does Make a Difference
If the system is too small, it won’t be able to cool the room efficiently, whereas oversized units consume more power and switch on and off more frequently. The correct size can be chosen by a technician based on the room size and quality of insulation.
Energy Efficiency Ratings
Though units with a high number of stars require a bigger investment at the beginning, they usually pay back during the life of the equipment. This factor is especially important considering the extended cooling period in Brisbane.
Steps of a Good Installation
– The layout and insulation of the house is being assessed
– Proper placement of both indoor and outdoor units
– Electrical connections are made by a licensed electrician
– Pressure testing and refrigeration charge according to manufacturers’ recommendations
– Final check-up of the performance
The Most Frequent Installation Problems
Some of the most common installation mistakes include wrong placement of the outdoor unit, improper refrigerant charge, and under-sized ductwork. While some problems may not be visible at once, they will cause increased operating costs and more frequent repairs later on.
The Importance of Professional Installation
Handling refrigerants and wiring during an installation is mandatory in Australia by law. Apart from that, a proper installation ensures efficiency, reduced noise and longevity of your unit before any significant maintenance is needed.
Frequently Asked Questions
How long will it take to install my air conditioning unit?
A split system will require several hours while ducted system could take one to three days depending on the size of the house.
Which air conditioner should I choose according to my house size?
It depends on the room size, the height of your ceilings, insulation level and sunlight. It would be better to have it checked by a specialist.
Does it make sense to pay extra for the increased efficiency rating?
Usually yes because although initially you spend more money on the installation, it will eventually save your budget.
Do I have to get council approval to install air conditioning?
Most typical residential installations do not require council approval, although you may want to check on the special considerations for air conditioning units installed in heritage-listed houses or apartments.
Conclusion
A smart air conditioning installation will benefit you many years down the line. It pays to invest time in finding the correct unit size and getting your system installed by professionals.
