The Tplink N300 is a wireless range extender/repeater network device that repeats the network signals of your existing device, this device is usually useful to extend the network signals of your current WiFi router. Because the router device is not suitable for the long-range area. In the long-range area, the network connectivity becomes slow or interrupted. Then, if you really want to increase the signals of the router device then you completely increase the network signals with the help of the Tplink N300 wireless range extender device. Because this device is very compatible with all brands of router & networking devices. If you want to increase the network signals of your wireless router then you need to connect the router to the N300 wireless repeater/extender device.
The N300 range extender device extends the network coverage with reliable network speed. With this extender device, you can boost the network coverage by up to 8,000 sq. ft. This device is very compatible with all brands of router, gateway, modem, & access points. If you really enhance the network signals then you completely perform the tplink n300 setup. Because the setup of the networking extender is more important to amplify the network signals.
Customize The Network Of Tplink N300 Wireless Range Extender
If you wish to increase the network signals then you need to customize the network of the range extender. If you cannot customize the network of this range extender then the network signal is not increased. If you wish to properly customize the network of the range extender device then you need to follow some steps. Because in the given below there are some steps, by which you can easily customize the network of the N300 range extender device.
Check the internet status
If you really configure the network of the range extender device then you can accurately configure the internet status of the range extender device. If you wish to get the internet status option, then you get it in the network setting option of the range extender device. But for this, you need to access the login page. You simply insert http://tplinkrepeater.net in the internet browser. After accessing the login page, you insert the login admin password in the password field. Afterward, successfully log in to the account. In the network setting of the wireless range extender, you get the internet status option. Just click this option, and then check the status of the range extender. In this option, you properly verify your range extender device connects to the router & client device. If it is not connected then you need to connect it in a suave.
Configure wireless network
After checking the internet status of the range extender device, you need to configure the wireless network of the N300 extender. In the wireless network of the range extender device, you need to configure the 2.4 GHz network. But get the wireless network option, you successfully log in to the account. After login into the account, you go to the setting and then go to the wireless network. Under this option, you need to enable connection to the 2.4 GHz network and then click the wireless scanner to find out all the wireless networks. Afterward, you need to select the wireless network you want to boost the network. After selecting the host network then you need to enable the security to fully protect the network device. After making all the wireless networks, you should click the save option to save all the settings of this network.
Change LAN setting
To properly configure the network of the N300 range extender device you need to change the LAN setting. In the LAN setting of the range extender device, you should configure the IP address, subnet Mask, & default gateway. This setting is properly configured in the LAN setting of this device. In the web utility of the browser, you simply input tplinkap.net and then insert the admin password in the password field. Afterward, use the IP address field and then properly configure the IP address. Then, configure the subnet mask with the subnet mask option. In the end, you need to configure the default gateway with the provided default gateway option.
Adjust WiFi network coverage
If you wish to access the high-speed network signals then you can adjust the WiFi network coverage with the provided network coverage option. This option is available in the network setting of the Tplink N300 wireless range extender. Afterward, you select the Minimum, maximum, or medium option. With the option, the network coverage absolutely adjusts. And click the save option.
Set Access control
If you wish to set the access control then you can easily configure it with the access control option. Just visit in the setting and then visit in the advanced setting. Then, get the access control option. Now, you can enable this option. The network setting of this range extender is completely configured.
