Imagine putting a cup of water in the air. If the temperature on the glass side is below the ambient temperature, the steam will condense as drops.
In the north of our country, the floor is often in spring or it is often humid, it is very sticky to move, it is inconvenient. This phenomenon generally occurs on the first floor of a house. People call this the “slanted” phenomenon. Its mechanism is similar to the phenomenon of the glass of water mentioned above. It is clear that the floor is wet due to 2 conditions:
Due to high humidity
Soil temperature is lower than the air temperature.
The floor cannot absorb moisture, it has a low thermal conductivity, so the air-containing vapor layer near the surface cools, forming water droplets, the temperature at which steam condensation occurs.
Because half sweat
Thanks to the above explanation, we will better understand the causes of floor sweating:
First, due to saturated humid air. At this point, the vapor in the air has reached its maximum and cannot receive any more vapor. If the steam continues to flow into the air, it will condense into moisture. Or it means that when the air humidity reaches the saturation level (100%), the vapor floor that evaporates in the air will condense into liquid water, causing a wet floor.
Secondly, due to the humid tropical climate of our country, the warm and rainy monsoon, and the air’s humidity is very high (more than 80%). Accumulated precipitation is 1500-2000 mm/year, so the floor naturally sweats.
How to handle a floating floor
Climate is a factor why we cannot follow our will. Therefore, to limit the situation with wet floors, we must do the following:
- Always close the door
It should close tightly and restrict the opening of all doors in the house. This will prevent air exchange inside the home and reduce sweating.
- Clean the house with a dry cloth
When the floor sweats uncomfortably, it is best to clean it with a dry, porous cloth to absorb water better.
- Turn on the air conditioner in dry mode
Use a dry conditioner or humidifier to keep the floor dry at all times. Also, you can use other types of equipment, such as extractors, heating lamps.
- Use hygroscopic materials
Today, there are many types of dehumidifiers, various designs, and backgrounds on the market. Invest in this device if possible because it has a very good dehumidification ability to help keep your home dry and clean.
If your floor continues to sweat, you may be making the following mistakes:
- Open all interior doors and windows.
Many people mistakenly believe that opening the door ventilates the home faster and drier. But this is a misconception, because the higher the humidity, the worse it is.
- Clean the floor with water.
Many people sweating from the floor often make the floor uncomfortable, so they used a mop to clean the house and then turned on the fan to dry. However, this method makes the floor more humid and easily causes slippery conditions. Prolonged moisture buildup will cause the wall to get wet and damage interior design equipment.
- Close the door, turn on the fan to dry.
Turning on the fan to dry in cold weather does not work on drying the lance, but it also blows cold air out of the fan, causing moisture to condense more.
How to prevent the floor from sweating
According to the experts’ recommendations to prevent floor stagnation, it is advisable to choose thin-walled materials such as polished glazed porcelain tiles, wood, imitation wood-plastic floors, light-blocking materials, foam ceramic, etc. The house needs a lot of thermal inertia to limit the stagnation of water on the floor. … 5 mm, wood or floor less than or equal to 15 mm. A combination of wool rugs, jute rugs, and sedge mats (should dry in high humidity).
The adhesive solution should be as thin as possible. If conditions allow, use adhesive to remove the binder solution. Then comes basic insulation, with little thermal inertia. It is necessary to select materials that can resist stress and have a high thermal resistance waterproof layer to protect the capillary floor’s thermal insulation. Also, during construction, a layer of coal slag with a thickness of about 20 cm should be poured, then poured with sand, leveled so that the floor does not sweat during use.
Matched Floor Solution: Faux Wood and Plastic Floors
Artificial wood look porcelain flooring tile is considered a type of floor material with excellent anti-sweat, excellent. The reason why this floor has this advantage is that the plastic is mainly reinforced with high-quality additives, it has low heat absorption, so it does not create a temperature difference between the floor and the surrounding air. Therefore, there is a limitation of the humidity situation.
Also, wood floors have many other benefits, such as preventing slipping, preventing harmful bacteria during the use of products with high resistance, and a variety of designs for consumers.
Above is all the information related to dealing with perspiration.
Hopefully, this article has provided more useful information for readers.